Fun Fold

Oh, what fun, we feature Fun Folds for our February Creating Kindness Blog & Video Hop! Every Design Team member has chosen a Fun Fold, their favorite or one they always wanted to make. This promises to be a very creative blog & video hop, especially because we’re hopping this month with Lou Kitzelman from Australia as our guest designer. In addition, we’re welcoming Jerim Dickens to our Design Team!

Oh, wat een pret, we tonen Fun Folds in onze Creating Kindness Blog & VIdeohop van februari. Elk Design Team lid heeft een Fun Fold gekozen, een van hun favorieten of een die ze altijd al een keer wilde maken. Het beloofd een zeer creatieve blog & videohop te worden, helemaal omdat we deze maand met Lou Kitzelman als onze gast designer hoppen. Tevens verwelkomen we Jerim Dickens tot ons Design Team!

gift card holder

I chose to not make a specific fun fold, but to design a folded gift card holder. I love making gift card holders as I often give gift cards. It might not be the most original gift, but I always tend to think that at least the receiver can choose exactly what he/she wants and by adding a handmade gift card holder, I still add that personal touch.

Ik heb er voor gekozen om geen specifieke fun fold te maken, maar om een geschenkkaarthouder te ontwerpen. Ik vind het leuk om geschenkkaarthouders te maken, omdat ik vaak geschenkkaarten kado geef. Het is misschien niet het meest originele geschenk, maar ik denk altijd maar dat de ontvanger tenminste zelf kan kiezen wat hij/zij wil en door er een handgemaakte geschenkkaarthouder bij te maken voeg ik toch een persoonlijke noot toe.

lots to love box framelits

The design I made is a very simple fold, but by using two little dies (see picture) from the Lots to Love Box framelits I was not only able to create a spot that keeps the giftcard in place, but also a nice and clean clasp.

Het ontwerp dat ik gemaakt heb is een simpele vouwkaart, maar door twee kleine stansjes (zie foto) te gebruiken van de Lots to Love Box framelits te gebruiken heb ik niet alleen een plek gecreëerd om de geschenkkaart op z’n plaats te houden, maar ook een strakke sluiting.

If you don’t have this die set, you still can make this gift card holder by using the partial diecutting technique – Click here to go to tutorial on how to do that.

Als je deze framelits niet hebt, dan kun je deze geschenkkaarthouder nog steeds maken door gebruik te maken van de gedeeltelijke stans techniek – Klik hier om naar een beschrijving hiervan te gaan.

a little wild gift card holder (metric version)

I designed the gift card holder in centimeters and in inches. For the centimeter version I used the very cute A Little Wild stamp set in combination with the luscious Bundle of Love designer series paper and the Stampin’ Blends.

Ik heb de geschenkkaarthouder in centimeters en inches ontworpen. Voor de centimeter versie, heb ik de schattige A Little Wild stempelset gebruikt in combinatie met het rijke Bundle of Love designer series papier en de Stampin’ Blends.

Look at the clean & simple tab clasp made with the Lots to Love Box framelits! / Kijk naar de strakke sluiting met het lipje gemaakt met de Lots to Love Box framelits!

The base of the metric gift card holder is half a sheet of a4 cardstock (10,5 x 29,7 cm), which is scored at the long side at 5 and 19 centimeters. In addition, you need the following (see below).

De basiskaart van de centimeter versie is een half a4 (10,5 x 29,7 cm), welke gerild is, aan de lange kant, op 5 en 19 cm. Daarbij heb je het volgende nodig.

Front/Voorkant

  • 8,5 x 10 cm cardstock
  • 4,5 x 10 cm cardstock
  • 8 x 9,5 cm designer series paper
  • 4 x 9,5 cm designer series paper

Inside/ Binnenkant:

  • 4,5 x 10 cm cardstock
  • 10 x 13,5 cm cardstock
  • 10 x 10 cm cardstock
  • 4 x 9,5 cm  designer series paper
  • 9,5 x 13 cm whisper white/very vanilla
  • 9,5 x 9,5 cm whisper white/very vanilla

bubble over gift card holder

The inch version of this gift card holder is made with the Bubble Over bundle in combination with the cheerful Bubbles & Fizz designer series paper from the Sale-A-Bration folder.

De inch versie van de geschenkkaarthouder is gemaakt met de Bubble Over bundel in combinatie met het vrolijke Bubbles & Fizz designer series papier uit de Sale-A-Bration folder.

The base of the imperial gift card holder is half a letter size sheet of cardstock (4 1/4 x 11 inches), which is scored at the long side at 2 and 7 inches. In addition, you need the following (see below).

De basiskaart van de inch versie is een half letter size vel cardstock (4 1/4 x 11 inches), welke gerild is, aan de lange kant, op 2 en 7 inches. Daarbij heb je het volgende nodig.

Front / Voorkant:

  • 2 6/8 x 4 1/8 inches cardstock
  • 1 7/8 x 4 1/8 inches cardstock
  • 2 5/8 x 4 inches designer series paper
  • 1 6/8 x 4 inches designer series paper

Inside / Binnenkant:

  • 1 7/8 x 4 1/8 inches cardstock
  • 4 1/8 x 4 7/8 inches cardstock
  • 3 7/8 x 4 1/8 inches cardstock
  • 1 6/8 x 4 inches designer series paper
  • 4 x 4 6/8 inches whisper white/very vanilla
  • 3 6/8 x 4 inches whisper white/very vanilla

YouTube icon   Video Hop !!

If you want to see how I made this gift card holder, you can watch this video on my YouTube channel 🙂  It’s in Dutch, but I added some English information and by looking you’ll get the idea. At the bottom of this post you’ll also find a list with the used products.

To do the video hop you can start off at my channel with this video (click on the image below), then click the video description to get the links to see the other Design Team’s video tutorials. In addition, on the bottom of this blog post you’ll not only find the link list to all the blogs of the Design Team members, but also a link list to all their video’s.

Als je wilt weten hoe ik deze geschenkkaarthouder heb gemaakt, bekijk dan deze video op mijn YouTube channel.  Helemaal onderaan dit bericht vind je ook een lijst met alle gebruikte materialen.

Om de video hop te doen, kun je starten met mijn video (klik op onderstaande afbeelding), klik vervolgens op de video beschrijving om de linken naar de tutorials van de andere Design Team leden te zien. Onderaan dit bericht vind je niet alleen de linkenlijst naar alle blogs van de Design Team leden, maar ook de linken naar hun video’s

keep on hopping

You must be very curious now to see the projects of the other designers! Just click on the name below mine (I’m Danielle Bennenk) or on the ‘Next’ button below to hop-a-long and see the creations of Sacha!

Je bent nu vast heel nieuwsgierig naar de projecten van de andere deelnemers! Klik gewoon op de naam onder die van mij (ik ben Danielle Bennenk) of op de ‘Next’ knop hieronder om door te hoppen naar het blog van Sacha!

Have fun!

Link list

video list

1. Jay Soriano – UK https://youtu.be/ItzoHymcB-Q
2. Jenny Hall – USA https://youtu.be/n7d_0XUcXCM
3. Marcy Denning – Canada https://youtu.be/t5R9pcPVhzo
4. Maria Willis – USA https://youtu.be/htzs6o9lrlk
5. Danielle Bennenk – The Netherlands https://youtu.be/v9rBETkETgc (This is me)
6. Sacha van de Kerkhof – The Netherlands https://youtu.be/t5vD4xw5ZtY
7. Cheryll Miller – Australia https://youtu.be/EKg8pLx08XI
8. Jessie Holton – Australia https://youtu.be/ySeU37i-rp4
9. Jerim Dickins – UK https://youtu.be/mIkcFNUu5Js
10. Carolynn Sander – Canada https://youtu.be/Wkmc6YBo55k

P.S. Hieronder vind je alle door mij gebruikte materialen. Wil je hier iets van aanschaffen? Dan verzorg ik graag je bestelling (mail: danielle@mrsbrightside.nl)! Je kunt op de onderstaande afbeeldingen klikken om naar mijn webshop (Credit Card only) te gaan.

Product List

Starburst Punch

€ 22,00

Big Shot

€ 120,00